Table of Contents
Advertisement
Quick Links
SAFETY INSTRUCTIONS
Electricity is used to perform many useful functions, but it can also cause personal
injuries and property damage if improperly handled. This product has been engineered
and manufactured with the highest priority on safety. However, improper use can result
in electric shock and / or fire. In order to prevent potential danger, please observe the
following instructions when installing, operating and cleaning the product. To ensure
your safety and prolong the service life of your Liquid Crystal Display, please read the
following precautions carefully before using the product.
1.
Read these instructions.
2.
Keep these instructions.
3.
Heed all warnings.
4.
Follow all instructions.
5.
Do not use this apparatus near water.
6.
Clean only with dry cloth.
7.
Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
8.
Do not install near any heat sources such as radiators, heat registers, stoves,
or other apparatus (including amplifiers) that produce heat.
9.
Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding
type plug has two blades and a third grounding prong. The wide blade and
the third prong are provided for your safety. If the provided plug does not fit
into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at the
plugs, convenience receptacles, and the point where they exit from the
apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12.
Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to avoid injury
from tip-over.
13. Unplug this apparatus during lightening storms or when unused for long
periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
- 1 -
www.SCEPTRE.com
SCEPTRE C275 FHD Display User Manual
Advertisement
Table of Contents
Related Manuals for Sceptre C275
Summary of Contents for Sceptre C275
-
Page 1: Safety Instructions
- 1 - www.SCEPTRE.com SCEPTRE C275 FHD Display User Manual... -
Page 2: Safety Instructions
No naked flame sources, such as lighted candles, should be placed on the ap paratus. 10. Operating environment: temperature: 5°C~35°C, Humidity: 10% to 90% non- condensing, altitude: 0~2,000 m. - 2 - www.SCEPTRE.com SCEPTRE C275 FHD Display User Manual... -
Page 3: Important Information
IMPORTANT INFORMATION - 3 - www.SCEPTRE.com SCEPTRE C275 FHD Display User Manual... -
Page 4: Important Information
This UL mark is certify of product compliance with UL energy efficiency certification. This mark is to certify the AC adapter from this product complies with the definition of Limited Power Source. - 4 - www.SCEPTRE.com SCEPTRE C275 FHD Display User Manual... -
Page 5: Safety Instructions
Do not place the display on cloth or sure of the type of power supplied to other materials that may be located your home, consult your dealer or local power company. - 5 - www.SCEPTRE.com SCEPTRE C275 FHD Display User Manual... - Page 6 power cord and contact your dealer Operating environment: Temperature: immediately. Do not try to repair the 5°C ~ 35°C, Humidity: 10% to 90% product yourself. non-condensing, Altitude: 0~2,000 m. - 6 - www.SCEPTRE.com SCEPTRE C275 FHD Display User Manual...
- Page 7 To ensure safety and many years of trouble free operation of your LED monitor, please read the manual carefully before making any adjustments, and keep them in a safe place for future reference. We hope you enjoy your new SCEPTRE monitor.
-
Page 8: Opening The Package
Opening the Package The SCEPTRE display is packaged in a carton. The size and weight of the product might be too heavy for 1 person to handle. In the event of that happening; it is recommended that the display package must be handled by a minimum of 2 or more persons. -
Page 9: Attaching The Base
Make sure the wall is structurally safe for the weight of the display Make sure the wall mount kit is compatible with the display Read and follow all instructions provided by the wall mounting kit. Securely install all screws and connections. - 9 - www.SCEPTRE.com SCEPTRE C275 FHD Display User Manual... -
Page 10: Removing The Base
Unscrew the screw at the bottom of the base and remove the base. Pull towards you and then up to open the cover. Unscrew the 2 screws that was covered up and you can take apart the neck. - 10 - www.SCEPTRE.com SCEPTRE C275 FHD Display User Manual... -
Page 11: Table Of Contents
How do I clean the LED Monitor? ............29 Specification ..................30 LIMITED PRODUCT WARRANTY ............ 31 Disclaimer, Trademarks, Icons & Copyright Information ....33 FCC Compliance Statement .............. 34 - 11 - www.SCEPTRE.com SCEPTRE C275 FHD Display User Manual... -
Page 12: Identifying Front And Rear Panel
Please Note: The 8mm length of screw refers to how deep the screw can go inside the mounting holes. When you’re buying screws, you should add the original 8mm to the thickness of your mounting plate in order to get the total screw length. - 12 - www.SCEPTRE.com SCEPTRE C275 FHD Display User Manual... -
Page 13: Rear Control Buttons
– This button switches between all the different inputs of the display. When the OSD is active, this button acts as the EXIT button and exits out of the option or OSD. – This button turns the display on or off. - 13 - www.SCEPTRE.com SCEPTRE C275 FHD Display User Manual... -
Page 14: Rear View Connections
AUDIO OUT (3.5mm Mini-jack) – This connection is for audio out from the monitor to multimedia speakers or headphones. POWER – This plug is responsible for providing power to the monitor. Use it with the included AC adapter. - 14 - www.SCEPTRE.com SCEPTRE C275 FHD Display User Manual... -
Page 15: Connections
2. Obtain a HDMI cable and connect one end to the back of the monitor and the other end to the back of the computer. 3. Turn on the power of both the C275 LED MONITOR and the computer. Please Note: ... -
Page 16: If You Have Vga Connection On Your Video Card
If you were previously using a CRT (bulky) monitor, please hook up your old monitor first and make sure your refresh rate is set to 60 Hz frequency before using the C275 LED MONITOR. You can find the refresh rate information and change it by RIGHT CLICKING on the desktop with nothing selected. -
Page 17: If You Have Displayport Connection On Your Video Card
2. Obtain a DisplayPort cable and connect one end to the back of the monitor and the other end to the back of the computer. 3. Turn on the power of both the C275 LED MONITOR and the computer. - 17 - www.SCEPTRE.com... -
Page 18: On Screen Display (Osd) Menu
buttons to adjust each option’s values. option you want to adjust. Use the When you want to exit press the button. - 18 - www.SCEPTRE.com SCEPTRE C275 FHD Display User Manual... -
Page 19: Luminance
PRESET – This option lets the user select pre-calibrated options of brightness and contrast. DCR – This option automatically adjusts the contrast for you depending on the graphics displayed at the time. - 19 - www.SCEPTRE.com SCEPTRE C275 FHD Display User Manual... -
Page 20: Image
Always use auto adjust first to adjust the image. This option is only available with a VGA connection. The image option will be disabled if you are using HDMI. - 20 - www.SCEPTRE.com SCEPTRE C275 FHD Display User Manual... -
Page 21: Color Adjust
USER COLOR – This option lets the user adjust the white balance by tweaking the RED, GREEN, and BLUE color. If you have selected the BLUE LIGHT SHIFT option, it will adjust the level of blue light on the display. - 21 - www.SCEPTRE.com SCEPTRE C275 FHD Display User Manual... -
Page 22: Osd Settings
TRANSPARENCY – This option adjusts the transparency of the OSD menu. Please Note: Changing the language of the OSD will alter all the messages and OSD language of the monitor. There is no reset for this function. - 22 - www.SCEPTRE.com SCEPTRE C275 FHD Display User Manual... -
Page 23: Reset
AUTO POWER OFF – This option will turn the monitor off if the monitor does not receive a video signal in 1 hour. Please Note: IMAGE AUTO ADJUST and COLOR AUTO ADJUST only available under the input VGA. - 23 - www.SCEPTRE.com SCEPTRE C275 FHD Display User Manual... -
Page 24: Other
SHARPNESS – This option adjusts the sharpness in each picture. VOLUME – This option adjusts the volume level of the monitor’s built in speakers. MUTE – This option mutes the speakers built into the monitor. - 24 - www.SCEPTRE.com SCEPTRE C275 FHD Display User Manual... -
Page 25: Supported Pc (Vga) Resolution
1080p *Once a mode is optimized, there is no need to make any further adjustment as long as the VGA card remains unchanged. **Specifications are subject to change without notice. - 25 - www.SCEPTRE.com SCEPTRE C275 FHD Display User Manual... -
Page 26: Troubleshooting
Click on OK 2-3 times to finalize your change. If you do NOT have a CRT monitor or it’s already broken, please make sure both the C275 LED monitor and your computer is turned off. Turn on the LED monitor and the computer. - Page 27 HOW DO I RESET Make sure there is a valid video signal to the monitor and THE MONITOR press menu to open the OSD. Look for ALL RESET under the OTHERS options. - 27 - www.SCEPTRE.com SCEPTRE C275 FHD Display User Manual...
- Page 28 The monitor only decodes PCM sound signals. Make sure your video device’s audio output is through HDMI and is SOUND FROM THE SPEAKERS WHEN outputting PCM sound format. USING THE (OPTIONAL) HDMI PORT - 28 - www.SCEPTRE.com SCEPTRE C275 FHD Display User Manual...
-
Page 29: How Do I Clean The Led Monitor
Wipe the display with a dry micro-fiber cloth or 100% cotton cloth afterwards. - 29 - www.SCEPTRE.com SCEPTRE C275 FHD Display User Manual... -
Page 30: Specification
VGA, HDMI (HDCP supported), AUDIO IN/OUT, DISPLAYPORT FCC, cTUVus, RoHS, MS WHQL, ISTA 3A Compliance V7.0 Energy Star 2 x 3W 4 Ohm Built-In Speakers *Specifications are subject to change without notice. - 30 - www.SCEPTRE.com SCEPTRE C275 FHD Display User Manual... -
Page 31: Limited Product Warranty
(SCEPTRE reserves the right to determine “wear and tear” on any and all products); unsatisfactory visual or audio performance not caused by a manufacturing defect;... - Page 32 Dead Pixel Policy SCEPTRE sets limit on the LCD at 3 dead pixels in a cluster adjacent to each other, or 5 dead pixels in a combination of color and brightness. Any number of dead or bad pixels under the limit is considered to be within normal performance specification of the LCD and is not considered defective.
-
Page 33: Disclaimer, Trademarks, Icons & Copyright Information
SCEPTRE is a trademark or registered trademark of Sceptre Group. Sceptre, Inc. shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product. -
Page 34: Fcc Compliance Statement
European Notice Products with the CE marking comply with both the EMC Directive (89/336/EEC), (93/68/EEC) and the Low Voltage Directive (72/23/EEC) issued by the Commission of the European Community. - 34 - www.SCEPTRE.com SCEPTRE C275 FHD Display User Manual...