Table of Contents
Advertisement
Quick Links
About this manual
This manual is designed to assist you in setting up and using the LCD Monitor.
Information in this document has been carefully checked for accuracy; however,
no guarantee is given to the correctness of the contents. The information in this
document is subject to change without notice.
proprietary information protected by copyright. All rights are reserved. No part
of this manual may be reproduced by any mechanical, electronic or other means,
in any form, without prior written permission of the manufacturer.
Copyright
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy, and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
=
Reorient or relocate the receiving antenna.
=
Increase the separation between the equipment and the receiver.
=
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
=
Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the manufacturers may
void the user's authority to operate this equipment.
This document contains
Copyright 1999, All Rights Reserved
i
PREFACE
Advertisement
Table of Contents
Related Manuals for Sceptre BT14
Summary of Contents for Sceptre BT14
- Page 1 About this manual This manual is designed to assist you in setting up and using the LCD Monitor. Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice.
- Page 2 NOTE: A shielded-type power cord is required in order to meet the FCC emission limits and also to prevent interference to the radio and television reception. It is essential that only the supplied power cord be used. Use shielded cables only to connect I/O devices to this equipment. Canadian DOC Notice For Class B Computing Devices This Class B digital apparatus meets all requirements of the...
- Page 3 Servicing of any nature should be performed only by an authorized technician. Safe storage of LCD Monitor is in a range of –20 ~ 60 C(or –4 ~ 140 F). Storing LCD Monitor outside this range could result in permanent damage.
-
Page 4: Table Of Contents
Chapter 1 : Quick Installation Chapter 2 : Installation 2.1 Unpacking 2.2 Mount LCD Monitor 2.3 Viewing Angle Setting 2.4 Seperating LCD Monitor from Its stand(if necessary) 2.5 Positioning 2.6 Screw Monitor Interface for Arm Applications 2.7 Connecting to computer 2.8 Connecting AC Power 2.9 Connecting the Stereo Speakers... -
Page 5: Chapter 1 : Quick Installation
3. Connect signal cable to the computer. 4. Connect the power cord into the jack of LCD Monitor and plug the other end of power cord into a wall socket. 5. Turn the computer on. -
Page 6: Chapter 2 : Installation
If you find that any of these items is missing or appears damaged, contact your dealer immediately. Do not throw away the packing material or shipping carton in case you need to ship or store LCD Monitor in the future. -
Page 7: Mount Lcd Monitor
2.2 Mounting LCD Monitor To mount LCD Monitor onto its stand, please refer to the following instructions: (Please see Figure 2-2.) Connecting Socket Turn both LCD Monitor and computer off before connecting Monitor onto its stand. Disconnect LCD Monitor’s AC power cord. -
Page 8: Viewing Angle Setting
2.3 Viewing Angle Setting Your LCD Monitor was designed to allow you to have comfortable viewing angle setting adjustment. Angle setting can be adjusted to the top (0 to 20 ) and to the left/right 90 degrees (0 to 90 ) each. (Please... -
Page 9: Seperating Lcd Monitor From Its Stand(If Necessary)
(if necessary) Another ergonomic feature incorporated into the design of your LCD Monitor is that it can be mounted either on its stand or on a shelf, wall, or any other convenient location. For illustration on how to separate LCD... -
Page 10: Positioning
Even though LCD Monitor has been designed using components that don’t use much power, they still generate quite a bit of heat. Set up your LCD Monitor so that the screen doesn’t face a window where sunlight often comes in. The reflection of sunlight makes LCD Monitor screen difficult to read or view. -
Page 11: Connecting To Computer
LCD Monitor to computer: Turn off your computer and LCD Monitor first. The signal cable is found at the rear side of the LCD Monitor. Connect the signal cable to VGA port on PC. Make sure the connection which you just made are secure. -
Page 12: Connecting Ac Power
LCD Monitor. Connect the power cord into the jack of LCD Monitor. The power jack is located at the rear of the Monitor next to the Monitor’s video port. Plug the other end of the power cord into a wall socket. The plug on the power cable will vary according to the electrical standard for your area. -
Page 13: Connecting The Stereo Speakers
Connect the sound cable to the “LINE OUT” jack on your PC’s audio card or on CD ROM drive. Connect the other end of the sound cable to LCD Monitor’s “LINE IN” jack on the back cover of LCD monitor. -
Page 14: Setting Up The Lcd Monitor
Please refer to Power Management section of Specification on Appendix for power consumption at each different mode. When LCD Monitor is in the power saving mode or detects an incorrect timing, Monitor screen will be blank and power LED indicator shows color in amber. -
Page 15: Chapter 3 : Display Controls
CHAPTER 3 Display Controls 3.1 User Controls and Indicator Operation of LCD Monitor is quite simple due to its intuitive, ergonomic design. A description for each of LCD Monitor function controls and indicator is provided below. Figure 3-1 shows the function controls as seen on the front panel of the Monitor. - Page 16 Stereo Speakers You can enjoy your PC audio stereo output from these speakers. DC Power Switch Push the power switch to turn Monitor on. Push it again to turn Monitor off. DC Power-On Indicator This LED indicator lights in green color when the power is on and in yellow color when its power is off.