Advertisement
DMS100-300 INTEGRATION WITH SOUNDCRAFT UI24R DIGITAL MIXER/USB MULTI-TRACK RECORDER
(to be included in an upcoming Ui24 firmware release)
DMS100/300 is designed to send Harman CPA IOSYS messages to Soundcraft Ui24R mixers. This feature provides a quick,
easy way to see which wireless microphone/instrument system is plugged into which Soundcraft Ui24R mixer input channel
as follows:
DMS100 workflow allows you to see: 1) the channel pairing LED color on the wireless transmitter (inside the battery
cover), 2) the channel pairing LED color on the wireless receiver front panel, and 3) the DMS100 device name and
channel ID color as text at the bottom of Soundcraft Ui24R HTML5 screen input mix channel display.
DMS300 workflow allows you to see: 1) the channel ID number on the wireless transmitter (inside the battery cover), 2)
the channel ID number on the wireless receiver front panel, and 3) the DMS300 device name and channel ID number as
text at the bottom of Soundcraft Ui24R HTML5 screen input mix channel display.
Connections and Setup
Preferred: Connect the DMS100/300 XLR line level output (switch set to "0dB" level on the back of the receiver) to the
Ui24R mixer input since it ensures a balanced audio signal throughout the audio chain. When connected in this manner, the
Ui24R input channel will receive the IOSYS message when the input channel is set to unity gain.
Alternate: Connect the DMS100/300 unbalanced ¼" line level output (base station switch set to "0dB" level on the back of
the receiver) to a Ui24R input channel. The Ui24R input channel must be set at a minimum +30dB input gain for it to receive
the IOSYS message via the DMS ¼" line level signal.
To Send DMS System Type and Pairing Channel Information to Ui24R
When a paired DMS100/300 system audio output is connected to a Soundcraft Ui24R mixer input channel and the DMS
device is unmuted, a Harman CPA IOSYS message appears at the bottom of the Ui24R input channel strip. The message
describes the type of DMS system and its pairing channel color or ID. (The DMS100 shows a pairing channel ID color on both
the DMS device and the wireless base station. The DMS300 show a channel ID number displayed on both the DMS300
transmitter and receiver).
Once connected, here is a summary of the information displayed in the Soundcraft Ui24R mix window:
Advertisement
