Disassembling Keyboard Assembly; White Keys And Black Keys; Rubber Contact - Yamaha PSR-E443 Service Manual

Hide thumbs Also See for PSR-E443:
Table of Contents

Advertisement

PSR-E443
14.

Disassembling Keyboard Assembly

(Time required: About 13 minutes)
14-1
Remove the lower case assembly. (See procedure 1.)
14-2
Remove the lower key bed assembly. (See procedure 7.)
14-3

White Keys and Black Keys

14-3-1
White and black keys for one octave unit are integrated
as a set. There are five sets in total. Only the C6 white
key, unlike the other keys, is not integrated in a set.
(Fig.9)
14-3-2
To remove a set, remove the four (4) each screws marked
[120A]. The white and black keys in the set can then be
removed. (Fig.9) When removing, unfasten the two (2)
hooks at the back of the black keys upward, and lift the
white and black keys while pulling them toward you a
little. (Photo 1)
14-3-3
To remove the white key C6, remove the screw marked
[120B], unhook as described in Procedure 14-3-2, and
pull out toward you. (Fig.9)
*
When all white and black keys were removed, first
attach the white and black keys C3 ~ B3 aligning
them with the boss, and then attach the remaining
white and black keys. (Fig.9)
14-4

Rubber Contact

14-4-1
Remove the white and black keys corresponding to the
rubber contacts to be removed.
(See Fig.9 and Procedure 14-3.)
14-4-2
Remove the rubber contacts. (Photo 2, Fig.10)
(上から見た図)
14
(鍵盤Ass'y)
HOOK (フック)
Photo 1  (写真 1)
14
鍵盤 Ass y の分解(所要時間 : 約 13 分)
.  
14-1  
下ケース Ass'y を外します。 (1 項参照)
14-2  
下ケース鍵盤 Ass'y を外します。 (7 項参照)
14-3  
白鍵、黒鍵
14-3-1 
白鍵、黒鍵は、左側から 1 オクターブ単位のセッ   
 
トになっていて、全部で 5 セットあります。C6 鍵   
 
は白鍵 1 個のみです。 (図 9)
14-3-2 
セットのものは、[120A] のネジ 4 本ずつ外してそ   
 
れぞれ 1 セット分の白鍵 ・ 黒鍵を外します。 (図 9)     
 
この時、黒鍵の後ろ側にある 2 つのフックを上方   
 
向に外し、白鍵・黒鍵を少し手前に引きながら持   
 
ち上げます。 (写真 1)
14-3-3 
C6 の白鍵は [120B] のネジ 1 本を外して、14-3-2 項 
 
のようにフックを外して手前に引きながら外しま 
 
す。   (図 9)
※  
すべての白鍵・黒鍵を外した場合の組み立ては、    
 
最初に C3 〜 B3 の白鍵・黒鍵をボスに合わせて組   
 
み付けてから、他の白鍵・黒鍵を組み付けてくだ   
 
さい。 (図 9)
接点ゴム
14-4 
14-4-1 
外そうとする接点ゴムに対応した白鍵・黒鍵を外   
 
します。 (図 9、14-3 項参照)
14-4-2 
それぞれの接点ゴムを外します。 (写真 2、図 10)
Boss
(ボス)
Fig.9  (図 9)
RUBBER CONTACT (接点ゴム)
Photo 2(写真 2)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents