Replacing The Cpu Enclosure Cover (Top) - Emerson FB2100 Field Replacement Manual

FB2100/FB2200 Flow Computer CPU Enclosure and Electronics Field Replacement Guide
5. Pull off the CPU enclosure cover to reveal the inside of the CPU enclosure.

Replacing the CPU Enclosure Cover (Top)

1. Press the CPU enclosure cover (whether the original cover or a new replacement
cover) against the CPU enclosure.
2. Tighten the two screws to attach the cover. Use a torque value of 5 to 7 in-lbs (0.6
to 0.8 n M).
3. Re-attach the CPU enclosure to the battery compartment. See Re-attaching the
CPU Enclosure to the Battery Compartment on page 9.
4. Re-connect the cable between the CPU enclosure and the sensor.
5. Replace the HMI module. See Replacing the HMI Module on page 7.
D301803X012
June 2018
11