Motorola Avigilon ACC VMA-RPA-RGD-8P2 User Manual page 43

1. Deactivate all the licenses associated with the ACC ES Rugged 8-Port Appliance. For more
information on deactivation of site licenses, see the ACC Help or the Avigilon ACC Client User Guide.
2. Initiate the Eject status for the SSD:
Important: Before you can physically disconnect and remove the SSD from the appliance,
you must initiate the Eject status on the Storage panel of the web interface launch page.
a. Log in to the ACC ES Admin Web UI. For more information, see
Web UI on
b. Click Storage on the navigation bar. For more information, see
the Storage SSD on
c. On the Storage panel of the web interface launch page, click
The status changes to
Note: All recording and software services on the appliance are stopped if a functioning
storage SSD is ejected. Recording will resume after the software services have restarted if
the same storage SSD is reinserted into the appliance.
3. Unlock and open the front panel using the provided key.
Tip: Turn the key 180 degrees counter-clockwise to unlock the front panel. The front panel
drops down and is attached to the appliance by a strap.
4. Locate the blue pull tab of the SSD tray.
Replacing the Storage SSD
page 18.
page 23.
and changes to
Launching the ACC ES Admin
Monitoring and Disconnecting
.
, indicating all services have stopped.
43