Connecting The Device To Users And Cameras - Motorola Avigilon ACC VMA-RPA-RGD-8P2 User Manual

Connecting the Device to Users and Cameras

On the Network panel, you can change network connections of the device. Two network connections are
supported: one for a corporate network and one for a camera network.
Note: The corporate network and the camera network must be on different IP subnets.
The corporate network is the network that typically provides users with access to the device. Users who
monitor video through the ACC Client software connect to the device through this network.
Important: Before adding the appliance as a new ACC site, or merging the appliance to an existing
ACC Site, first set its IP address. It is highly recommended to be in the same IP subnet as the other
servers in the ACC Site.
The camera network is a closed network that typically only contains cameras. This reduces the amount of
interference with video recording.
When connecting an ONVIF device to the camera network, configure it to use the appliance as its time / NTP
server if the appliance is running ACC 7.x or later.
For more information about the network connections, see
You can perform any of the following actions in each of the panes in the Network panel:
To... Do this...
Set how the In each of the panes in the Network panel, toggle Automatic IP on to discover
device obtains an connected networks automatically (the default setting), or off to manually specify the
IP address for connections. Enter the appropriate values in the following fields if you are manually
each network. entering the connection settings:
Click Apply to save your changes.
Set how the Toggle Automatic DNS on to discover connected DNS servers automatically (the
device obtains a default setting), or off to manually specify the DNS servers. Controls to add and
named address delete addresses in the list, and reorder them are activated when Automatic DNS is
from a DNS toggled off.
server.
Connecting the Device to Users and Cameras
IP Address
l
Subnet Mask
l
Default Gateway
l
Supported Network Configurations on page 10.
25