Changing The Programme After The Programme Has Started; Adding/Removing Laundry In Standby Mode; Childproof Lock - Beko DCU 9330 User Manual

"Iron Dry":
- Starts to illuminate when the drying degree
reaches "iron dry" step and remains illuminated
until the next step.
"Cupboard Dry":
Starts to illuminate when the drying degree
reaches "wardrobe dry" step, and remains il-
luminated until the next step.
"Cupboard Dry Extra":
Starts to illuminate when the drying degree
reach to "wardrobe dry extra" step.
"Ventilation":
- Illuminates when the programme ends.
C
Anti-creasing icon will light up at
the end of the programme if anti-
creasing function is active.
5.18 Changing the programme
after the programme has
started
You can use this feature to dry your laundry
in a different program after your machine has
started to run.
For example;
Press and hold the "Start/Pause/Cancel"
button for about 3 seconds to "Cancel" the
programme in order to select "Extra Dry"
programme instead of "Iron Dry" programme.
Select the "Extra Dry" program by rotating the
program knob. Press "Start/Pause/Cancel"
button to start the program.
C
If you select a new programme by
turning the programme selection
knob while your machine is running,
then the current program is can-
celled and new programme informa-
tion is displayed.
22 / EN
5.19 Adding/removing laundry
in standby mode
In order to add or take out laundry after the
start-up of the programme;
1. Press the "Start/Pause/Cancel" button
to switch the machine to "Pause" mode.
Drying process will stop.
2. Open the door at Pause position and close it
again after adding or taking out laundry.
3. Press "Start/Pause/Cancel" button to start
the program.
C
Any laundry added after the drying
process was started may cause the
already dried clothes in the machine
intermingle with wet clothes and the
result will be wet laundry after the
drying process is over.
C
Laundry may be added or taken out as
much as desired during a drying pro-
cess, but as this process will interrupt
drying continuously, it will extend the
program duration and increase energy
consumption.
Therefore, it is recommended to add
laundry before the drying programme
has started.
C
If you select a new programme by turn-
ing the programme selection knob while
your machine is in standby, then the
current program is cancelled and new
programme information is displayed.
5.20 Child-proof lock
There is a child-proof lock to prevent any pro-
gramme interruption due to the pressing of
button while the programme is running. The
loading door and all button except the "On/
Off" button on the panel are deactivated when
the child-proof lock is active.
In order to activate the child-proof lock, press
on the "audio warning" and "anti-creasing"
buttons simultaneously for 3 seconds.
To start a new programme after the pro-
gramme is over or to interrupt the programme,
the child-proof lock should be deactivated.
Press the same buttons for 3 sec. again to de-
activate the child-proof lock.
Lock symbol will appear on the screen when
the child-proof lock is activated.
Dryer / User Manual