Instructions - Bosch Rexroth IndraDrive ML Series Project Planning Manual

26/407 Bosch Rexroth AG
System presentation

Instructions

1. Loosen the mounting screws for the control section, optional card or
blank cover.
①②③ Mounting screws: ① CSx02.5 control section, ②
HPC01.1-MN02, ③ HPC01.1-P001
Fig. 1-4: HMU05 with control section (CSx02.5) and optional card
(HPC01)
2. Carefully remove the control section or optional card from the slot.
3. Installation is the reverse of removal.
DOK-INDRV*-HXX05******-PR02-EN-P
Rexroth IndraDrive ML Drive Systems with HMU05