Table of Contents
Advertisement
1
Safety Instructions
1.1
Intended use
1070 066 091-102 (01.08) GB
LSA Control S.L. www.lsa-control.com comercial@lsa-control.com (+34) 960 62 43 01
Please read this manual before commissioning the Servodyn-D drive. Store
this manual in a place to which all users have access at any time.
This manual contains information required for the intended use of this
product.
The drive inverters described
D have been developed, manufactured, tested and documented in com-
pliance with the safety standards. These products pose no danger to per-
sons or property if they are used in accordance with the handling
stipulations and safety notes prescribed for their configuration, mount-
ing, and proper operation.
D comply with the requirements of
D the EMC Directives (89/336/EEC, 93/68/EEC and 93/44/EEC)
D the EMC product standard EN 61800-3 + A11
D the Low-Voltage Directive (73/23/EEC)
D the harmonized standards EN 50178 (VDE 0160) and EN 60146-1-1
(VDE 0558-11)
D are designed for operation in industrial environments (emission class A),
i.e.
D no direct connection to public low-voltage power supply,
D connection to the medium- or high-voltage system via a transformer.
In residential environments, in trade and commerce as well as small en-
terprises class A equipment may only be used if it does not inadmissibly
interfere with other equipment.
This is a class A device which may cause radio interference in residen-
.
tial environments. In this case, the operator may be required to take
suitable countermeasures and to bear the cost of the same.
Before putting the drive inverters into operation, ensure that the machine
which the inverters are to be installed in meets the stipulations of the machin-
ery directive (98/37/EEC, 98/79/EEC) and the EMC directive (89/336/EEC).
The faultless, safe functioning of the product requires proper transport, stor-
age, erection and installation as well as careful operation.
Safety Instructions
1–1
Advertisement
Table of Contents
