HOW TO INSTALL
Installing this Washer should be settled in a
well-ventilated, safe place and where can
connect the drain hose and the power supply.
It is recommended to place the washer on a level
floor and avoid a place where the washer can be
exposed to direct sunlight.
The inlet hose
connector, which
supply the water
into the
washing tub,
can be adjusted
The feeding water indicator
- When the water spills out of the
hole under the label, it means too
much water has supplied.
Close the water tap.
The new hose-sets supplied
with the appliance are to be
used and the old hose-sets
should not be reused.
7
Insert the power plug firmly into
the power outlet.