Mercedes-Benz 300 TD-TURBO DIESEL 1982 Owner's Manual page 47

123 t
Table of Contents

Advertisement

Direct frequency dialing
In order to select a station with a known frequency, select the wave band, press
the function button □
and then enter the frequency by pressing the
corresponding push buttons.
Example:
Press any button marked
Press the function button
Enter frequency by pressing
When dialing a frequency directly, the number of the push buttons is not
displayed on the panel. The wave band is indicated by showing " MHz" for FM
or "KHz" for AM.
Note:
All AM stations have allocated frequencies ending with a " 0" .
All FM stations have allocated frequencies ending with an odd
(uneven) digit after the decimal point.
Broadcasters sometimes may not give their exact frequency but the next
closest even number.
US radio frequency ranges: AM 540—1600 KHz
Manual tuning (used to fine tune a
station or for manual scanning)
After selecting the desired AM or FM
wave band, press the function control
button a
FM 98.5 MHz
ED
ED
through
m
m
FM 88.1-107.9 MHz
Depress and hold the
(left or right side) button. The
frequency will increase or decrease
respectively in increments of 0.1 MHz
for FM or 1.0 KHz for AM. Release the
button when the desired station is
tuned in.
If, after pressing the function con-___
trol O
is not activated within eight seconds,
the manual tuning mode is ended
automatically.
AM 1050 KHz
Safety Note
El
ED
through
To avoid distraction of attention from
the vehicle's operation and the road,
ED ED ED ED
it is recommended NOT to perform
any manual tuning operations by the
driver while the vehicle is in motion.
Use the automatic station search
operation or preset stations instead.
Push button tuning
Six FM stations and four AM stations
can be stored in memory and recalled
by pressing the appropriate buttons
marked
El
or
To store stations in memory
Any FM station frequency displayed
A U T O M A T IC
on the panel can be stored on any
button marked
depressing the button desired and
holding it until the display has
changed from the " old" setting to a
" blank" and then to the new fre­
quency to be stored.
Radio
. the station seeker bar I
A U T O M A T IC
ED
D
l
through
for FM
03
through
for AM stations.
ED
ED
through
by
41

Advertisement

Table of Contents
loading

Table of Contents