Table of Contents
Advertisement
•
Press latch plate (1) into buckle (2)
and allow to engage audibly.
•
The belt must be tight and must be
checked for tightness immediately
after fastening and regularly during
the trip. If required, tighten lap belt
by pulling up on the upper belt
section.
Unfastening:
•
Depress red button (3) in buckle.
•
Return latch plate (1) to initial
position.
Operation:
The seat belt inertia reel stops the
belt from unwinding further in case of
vehicle deceleration in any direction
or if the belt is pulled out quickly.
Functional test:
The locking function of the inertia reel
can be tested by braking, driving
around a bend or by pulling the belt
out quickly.
Lap belt in the rear:
To fasten the lap belt, pull belt end
across your lap and insert the latch
plate in the buckle. The belt must not
be twisted and must be tight.
To shorten the belt, pull the loose belt
end. To lengthen the belt, turn latch
plate so that it is at right angles to the
belt webbing and pull the belt.
Seats
(
17
Advertisement
Table of Contents
