Table of Contents
Advertisement
Seats
>
Before folding down the rear seat
backrest, slip belt webbing into belt
retainers (4) and return latch plate of
buckle upward to belt webbing outlet.
If the folding seats are not being
used, engage belt webbing into
brackets (5).
Note:
No seat belt can be used for more
than one person. Belts are not
intended for children.
After an accident, inspect the seat
belts and replace them, if required.
The belt anchors in the vehicle should
also be checked.
18
9043
Belt webbing must not be routed via
sharp edges.
No modifications which may affect the
efficiency of the belts must be made.
For cleaning and care of belt web
bing, refer to page 63.
Seat Heater
The seat heater can be switched on
with the steering lock in positions
" 1" or " 2" .
Push switch to position 1 = contin
uous operation. The indicator lamp in
the switch comes on.
Push switch to position 2 = rapid
heating. Both indicator lamps in the
switch come on.
Switch in center position = seat
heater off.
Due to the relatively high power
consumption of the seat heater a
heavy load is placed on the battery.
For this reason the switch should not
be left in position 2 any longer than is
absolutely necessary while the engine
is switched off.
9414
Advertisement
Table of Contents
