VocoPro DigiQuad-Conference V2 Owner's Manual page 12

Rack Mounting 1 Receiver
The Digital-Quad is packaged with the rack mounts to attach them inside a standard 19" case. The mounts allow
for a single Digital-Quad receiver to be installed, or allow up to two to be racked together. Additional Digi-Quad
Receivers are sold separately.
Installing One Receiver
1. Identify the small and large rack mounts included with the system.
2. Screw the mounts into to the side of the receiver. The small and large mounts can be installed on either side.
3. Slide whole assembly into a 19" case and secure with screws.
12 \