Installing And Removing A Memory Module; Dimm Population Table - Gigabyte MJ11-EC0 User Manual

1-3-2 Installing and Removing a Memory Module

Before installing a memory module, make sure to turn off the computer and unplug the
power cord from the power outlet to prevent damage to the memory module.
Be sure to install DDR4 DIMMs on to this motherboard.
Follow these instructions to install a DIMM module:
1. Insert the DIMM memory module vertically into the DIMM slot and push it down.
2. Close the plastic clip at both edges of the DIMM slots to lock the DIMM module.
3. Reverse the installation steps when you want to remove the DIMM module.

1-3-3 DIMM Population Table

UDIMM/RDIMM Maximum Frequency Supported Table
Slots
2
Note:
• Memory capacity 64GB/channel
• When populating DIMMs into a channel, slot numbers having the suffix "1" must be populated first, then followed
by slot numbers having the suffix "0".
Hardware Installation
2
DIMMs Populated
1
2
1
DIMM
2R
2DR
1R
2S2R
2S4R
1 --
-- 1
2 --
1 1
-- 2
- 12 -
2
Frequency (MT/s)
1.2V
2667
2400
2133
1866
1866