Pci Subsystem Settings - Gigabyte MJ11-EC0 User Manual

2-2-7 PCI Subsystem Settings

Parameter
PCI Bus Driver Version
SL_SAS Control
PCIE_1 Lanes Configuration
PCIE_1 I/O ROM
Onboard LAN 1/2 Controller
Onboard LAN 1/2 ROM
PCI Devices Common Settings
Above 4G Decoding
(Note1) This section is dependent on the available LAN controller.
BIOS Setup
Description
Displays the PCI Bus Driver version information.
Change the SL_SAS function.
Options available: Disabled, SATA, PCIe x4. Default setting is PCIe x4.
Change the PCIe lanes.
Options available: Disabled, Auto, x16, x8x8, x8x4x4, x4x4x8,
x4x4x4x4. Default setting is Auto.
When enabled, this setting will initialize the device expansion ROM for
the related PCI-E slot.
Options available: Enabled, Disabled. Default setting is Enabled.
Enable/Disable the onboard LAN devices.
(Note1)
Options available: Enabled, Disabled. Default setting is Enabled.
Enable/Disable the onboard LAN devices, and initializes device
expansion ROM.
(Note1)
Options available: Enabled, Disabled. Default setting is Enabled.
Enable/Disable memory mapped I/O to 4GB or greater address space
(Above 4G Decoding).
Options available: Enabled, Disabled. Default setting is Enabled.
- 40 -