Table of Contents
Advertisement
56
SEATS AND RESTRAINTS
2. Repeat the steps for the other
seatback, if desired.
The switches (1) can be used to fold or
fold and tumble the second row seats
from the cargo area. See Second Row
Seats 0 50.
Returning the Third Row Seatback
to the Upright Position
1. Second Row Power Seat Fold and
Tumble Switches
2. Third Row Power Seat Fold and
Raise Switches
To return the third row seatback to
the upright position:
1. Ensure the seat belt is in the belt
stowage clip.
2. Open the liftgate to access the
controls for the seat.
3. Press and hold the switch (2) on
the side trim of the cargo area to
raise the third row seatback.
The left switch raises the left
seatback, and the right switch
raises the right seatback.
Warning
A seat belt that is improperly
routed, not properly attached,
or twisted will not provide the
protection needed in a crash. The
person wearing the belt could be
seriously injured. After raising the
rear seatback, always check to be
sure that the seat belts are properly
routed and attached, and are not
twisted.
4. Reconnect the center seat belt
mini-latch to the mini-buckle. Do
not let it twist.
5. Pull on the seat belt to be sure the
mini-latch is secure.
6. Repeat the steps for the other
seatback, if desired.
Advertisement
Chapters
Table of Contents
