Table of Contents
Advertisement
1 km/h (1 mph), press SET to the
first detent. To decrease speed to the
next 5 km/h (5 mph) mark on the
speedometer, press SET to the
second detent.
: Press to disengage ACC without
erasing the selected set speed.
: Press to select a following gap
time (or distance) setting for ACC of
Far, Medium, or Near.
The speedometer reading can be
displayed in either English or metric
units. See Instrument Cluster 0 113.
The increment value used depends on
the units displayed.
Switching Between ACC and
Regular Cruise Control
To switch between ACC and regular
cruise control, press and hold
A Driver Information Center (DIC)
message displays.
ACC Indicator
When ACC is engaged, a green
indicator will be lit on the instrument
cluster and the following gap will be
displayed. When the regular cruise
control is engaged, a green
indicator will be lit on the instrument
cluster; the following gap will not
display.
When the vehicle is turned on, the
cruise control mode will be set to the
last mode used before the vehicle was
.
turned off.
Warning
Always check the cruise control
indicator on the instrument cluster
to determine which mode cruise
control is in before using the
DRIVING AND OPERATING
Warning (Continued)
feature. If ACC is not active, the
vehicle will not automatically brake
for other vehicles, which could
cause a crash if the brakes are not
Regular Cruise
applied manually. You and others
Control Indicator
could be seriously injured or killed.
Setting Adaptive Cruise Control
If
get pressed and go into ACC when not
desired. Keep
being used.
Select the set speed desired for ACC.
This is the vehicle speed when no
vehicle is detected in its path.
While the vehicle is moving, ACC will
not set at a speed less than 5 km/h
(3 mph), although the minimum
allowable set speed is 25 km/h
(15 mph).
To set ACC while moving:
1. Press
2. Get up to the desired speed.
3. Press and release SET .
is on when not in use, it could
off when cruise is not
.
271
Advertisement
Chapters
Table of Contents
