Technical Data; Unpacking; Installation - AEG LF9A1612AC User Manual

Table of Contents

Advertisement

Compartment for salt.
Salt
Maximum level for detergent/
additives quantity.
When selecting a prewash
phase, put the detergent/
additive in a dosing ball
inside the drum.

4. TECHNICAL DATA

Dimension
Electrical connection
Level of protection against ingress of solid particles
and moisture ensured by the protective cover, ex‐
cept where the low voltage equipment has no pro‐
tection against moisture
Water supply pressure
Water supply
Maximum Load
Spin Speed
1) Connect the water inlet hose to a water tap with a 3/4'' thread.

5. INSTALLATION

WARNING!
Refer to Safety chapters.

5.1 Unpacking

WARNING!
Remove all the packaging
and the transit bolts before
installing the appliance.
Read carefully 'The
Water Softener
technology (Soft
Water)'.
Width/ Height/ Depth/ To‐
tal depth
Voltage
Overall power
Fuse
Frequency
Minimum
Maximum
1)
Cotton
Maximum
After a washing cycle, if
necessary, remove any
detergent residue from the
detergent dispenser.
600 mm/ 850 mm/ 630 mm/ 660 mm
220 - 240 V
2200 W
10 A
50 Hz
IPX4
0.5 bar (0.05 MPa)
8 bar (0.8 MPa)
Cold water
10 kg
1600 rpm
WARNING!
Use the gloves.
1. Remove the external film. If
necessary, use a cutter.
ENGLISH
9

Advertisement

Table of Contents
loading

Table of Contents