Mounting - Bosch FERION 1000 O Manual

Smoke Alarm
Used batteries or old devices are not to be disposed
of with the household waste. Dispose of them
according to the guidelines for electric and
electronic waste at the local collection points.
Parts included
1 smoke alarm device: base (3.A) and detector head (3.B), 2
batteries, fastening material: 1 screw, 1 plug

3 Mounting

Notice!
The device is designed for mounting according to DIN
14676 on flat or slanted ceiling. Wall mounting is not
allowed.
Perform the following steps. Find exact information about the
single steps on the following pages in this manual. See also the
graphics at the beginning of this manual.
1. Determination of mounting locations. (1) Observe the
information regarding Unsuitable locations for mounting, page
8, and regarding Audibility, page 8. Each device is to be
mounted horizontally on the ceiling in centered position with
a minimum distance of 0.5m to walls and objects. On slanted
ceilings >20° it is to be mounted 0.5m to 1m from the top of
the ceiling. (2.A), (2.B), (2.C), (2.D)
2. For each device: Inserting batteries, page 8. Observe the
polarity. (6.1)
Bosch Sicherheitssysteme GmbH
Graphics | en
08.15 | 3.1 | F.01U.309.848
7