Communications Performance - Omron K7L-UP-FLK Manual

K7L-UP-FLK

Communications Performance

Communications protocol
Transmission path connections
Communications method
Synchronization method
Baud rate *
Transmission code
Data length *
Stop bit length *
Error detection
Wait time
* Baud rate, data length, stop bit length and vertical parity can be separately set.
This catalog is intended only as a guide to selecting a product. For details on precautions when using the product,
be sure to read the [K7L-UP-FLK Liquid Leakage Position Sensor Operation Manual] (Cat. No. Z287).
The manual can be downloaded from the following website.
OMRON Industrial website: http://www.ia.omron.com/
4
CompoWay/F
Multi-point (32 nodes max. including Master)
ASCII
7/8 bits
1/2 bits
Vertical parity (none, even odd)
BCC (Block Check Character)
RS-485 (two-wire method, half-duplex)
Start-stop synchronization
4800/9600/19200/38400 bps
Binary
8 bits
Set automatically (no setting) depending on the
vertical parity setting.
Without vertical parity: 2 bit
With vertical parity: 1 bit
Vertical parity (none, even odd)
CRC-16 (Cyclical Redundancy Check)
00 to 99 ms (Default: 20 ms)
Modbus (RTU mode)