Chapter 3. Z-Wave Device Setting; Configuring Z-Wave Device Via Hac-1000 - Planet Networking & Communication HZS-100E User Manual

Chapter 3.

3.1 Configuring Z-Wave Device via HAC-1000

Please refer to the following steps to add Z-Wave device via HAC-1000 web.
Step 1. Include a Z-Wave device via web.
a) Go to "Z-Wave" and click "Device
Configuration".
b) Click" Include New Device" and the
screen will appear with "Add Device:
Waiting for a user action."
c) Use a paper clip or pin to press the
program button on the back of the
sensor for 1 time to connect.
d) If your device has successfully been added, it will show "Add Device: Command has
been completed successfully".
If the device didn't add successfully, please place the device next to the
gateway and try again.
Z-Wave Device Setting
9
- -
Z-Wave Wall-mount PIR Mostion Sensor
HZS-100E/HZS-100A