Planet Networking & Communication HZS-100E User Manual page 23

Z-Wave Wall-mount PIR Mostion Sensor
HZS-100E/HZS-100A
Click "Create Trigger".
Trigger: Name this
trigger.
Device: Select a Z-Wave
device.
Mode: Select "Arm" to
enable alarm.
Scene: When it triggers,
the fan will turn on.
Optional: After
triggering for 5 seconds,
the fan will turn off by
itself.
Switch to "AWAY" to
enable monitor mode.
When one of Z-Wave
devices is triggered,
control pad will alarm.
Step 5 After configuring this part, you can control Z-Wave devices and scenes via control pad.
.
Click the "Control Panel"
button.
23
- -