Planet Networking & Communication HZS-100E User Manual page 16

Step 4. Create Trigger via smart phone.
a. Click "Add".
c. Select the Z-Wave device and click
next.
g. Done successfully.
Z-Wave Wall-mount PIR Mostion Sensor
b. Name this new Trigger.
d. Select a mode for a Z-Wave device.
e. Select a scene.
f. Select the time for the trigger and
which scene to run.
h. If you enable Save and send alarm
notification, when it triggers, it will
have a log. You can check this in
Notification History.
16
- -
HZS-100E/HZS-100A