Appendix A: Troubleshooting & Frequently Asked Questions - Planet Networking & Communication HZS-100E User Manual

Appendix A: Troubleshooting & Frequently
This difference between Z-Wave
and ZigBee
How to reset the HZS-100 Series
Repeater Function
Asked Questions
Features
The frequency is different between Z-Wave and ZigBee. ZigBee
is 2.4GHz and Z-Wave is about 900MHz.
The outdoor distance is different. ZigBee is 10~75 meters and
Z-Wave is about 30 meters.
Z-Wave Device Installation
Use a paper clip or pin to press the program button for 10 times
within 10 seconds. Only use this procedure when the primary
controller is lost or inoperable.
Only HZS-530 Series can extend the frequency range of Z-Wave.
HZS-530 Series can act as a signal repeater to enhance the Z-Wave
wireless communication range. For example, the HAC-1000 (Control
gateway) is installed on the second floor to control over the HZS-300
(4-in-1 Sensor) on the first floor, but the Z-Wave frequency is weak.
Thus, HZS-530 Series can be installed in between the second floor
and the first floor to solve the problem.
27
- -
Z-Wave Wall-mount PIR Mostion Sensor
HZS-100E/HZS-100A