Chapter 6: Recording; Recording In Time Lapse (Or Normal)Mode; Alarm/Motion Channel Double-Recording - Samsung SMO-210TP User Manual

Chapter 6: Recording

1. Recording in Time Lapse (or Normal) Mode
• Input signals transmitted from up to 8 cameras are switched to output signals every 1/25
sec to be recorded by the VCR.
• The TRIGGER OUT port of the VCR must be connected to the VIT port of this system.
• When trigger signals from the VCR stop for more than 10 sec, the Self Trigger mode is
turned on to continue recording without the trigger from the VCR.

2. Alarm/Motion Channel Double-Recording

• This system double-records channels in case of an Alarm/Motion.
• It records the Alarm/Motion channels in between recording the output channels.
• The "VIDEO LOSS" channel is also subject to the Alarm/Motion Channel Double-
Recording.
• Ex.) The ALARM is turned on at CH2.
Then MOTION occurs at CH5.
CH2: Alarm Occurs CH5: Motion Occurs CH2: Alarm Off
e-41