When You Want To Watch A Door Bell Screen - Samsung SMO-210TP User Manual

e-24

11. When you want to watch a Door Bell screen

2) When Channel Loss is detected
If the channel loss detection function detects a channel loss, the word "EVENT" is
displayed on the screen and a warning buzzer sounds. When this occurs, press ENTER
and up to 15 frames before and after the detected channel loss are replayed on the Event
Replay window.
Press ENTER again to stop the event replay. If channel loss is detected on more than one
channel, press ENTER to start event replay for the next channel when the current event
replay finishes. When the event replay for all the channels on which channel loss has
been detected finishes, press ENTER to exit the Event Replay mode.
Channel loss histories are recorded in the EVENT LIST.
You can use the Door Bell screen only when a Door Bell Box is connected.
If the doorbell is pressed, a warning sound is generated and the screen mode changes to LIVE
mode, which displays 9 channels at the same time. The letter "D" is displayed on the screen
of the channel on which the doorbell has been pressed and a still screen is saved in the Door
Bell List. Up to 16 frames can be saved in the Door Bell List. You can select a frame and
view it on the screen.
Move to your desired item by going to "6. DOOR BELL LIST" on the SETUP menu and
press ENTER to display it as a still screen.
Then, press ENTER again to return to the "DOOR BELL LIST" screen.