Environmental Protection - IVT RHM-600 Manual

Instruction manual
• Never wet the device or spray water on it!
Cleaning
• Never use caustic agents to clean the plastic parts.
• At the end of your work, to prevent dust deposits you should
EN
use compressed air (max 3 bar) to clean out the ventilation
slots.
Carbon brushes
• Check the carbon brushes regularly (dirty or worn carbon
brushes result in excessive sparking and speed faults).
• Only genuine replacement brushes specially designed for
your tool should be used.
• Both carbon brushes should be replaced at the same time.
Use only identical carbon brushes.

Environmental protection

Recycle raw materials instead of disposing as
waste.
Tool, accessories and packaging should be sorted for
environment-friendly recycling.
The plastic components are labelled for categorized recycling.
These instructions are printed on recycled paper manufactured
without chlorine.
16