Clarke X-PRO CAT165 Operating & Maintenance Instructions page 5

10mm air belt sander
Table of Contents

Advertisement

OVERVIEW
NO DESCRIPTION
1
Idler Pulley
2
Drive Pulley
3
Abrasive Belt
4
Throttle Lever
When unpacking the tool, any damage or deficiency should be reported to
your CLARKE dealer immediately. The carton contains:
• Sander
• 60, 80 and 120 grit sanding belts
• Allen (hex) key
Your sander has been designed to give long and trouble free service. If,
however, having followed the instructions in this booklet carefully, you
encounter problems, take the unit to your local CLARKE dealer.
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
NO DESCRIPTION
5
Belt Release Catch
6
Airline Connector
7
Angle Adjustment Screw
8
Allen Key
5

Advertisement

Table of Contents
loading

This manual is also suitable for:

3120179

Table of Contents