Download Print this page

Chicco KeyFit 30 Zip Instructions page 2

Advertisement

SOFTGOODS REMOVAL:
PARTS LIST:
A. Newborn Positioner
B. Headrest Insert
C. Shoulder Pads
D. Crotch Strap Pad
E. Boot
TO REMOVE THE SEAT PAD:
Completely loosen the harness straps. Remove the Boot (See Steps 4-5). Remove the Crotch Strap Pad
(See Step 6). Refer to User Guide to remove the Canopy, Headrest Insert and Newborn Positioner (See Step 7).
Remove the Seat Pad (See Steps 8-11).
4
BOOT:
To remove, undo the snap button
located on the side of Boot. Repeat for other side.
IMPORTANT! If the Crotch Strap Pad prevents the harness from properly
fitting a small Infant, remove immediately and store for future use.
6
CROTCH STRAP PAD:
Unbuckle the Harness
and remove Crotch Strap Pad by locating the Tab and
pushing it through the Harness Buckle. Pull the Tab out
through the front of the Harness Buckle and remove.
B
A
C
D
E
5
Remove the boot. Guide the section from under
the front edge of the seat and lift up and remove the
boot.
7
Refer to user guide to remove the
Canopy, Headrest Insert and Newborn
Positioner.
2
8a
Unhook the elastic band attached around handle
pivot, repeat for the other side.
9
Pull Seat Pad away from the Adjuster Cover as
shown.
Hint: To help remove the Seat Pad, pinch the fabric
above the Adjuster Cover and pull forward.
11
Make sure the Harness Straps are completely tucked
behind the back of the Seat Pad and remove the Seat Pad.
Make sure back piece of the Seat Pad is properly
tucked into the softgoods when re-attaching the
Seat Pad.
8b
Pull out plastic tabs located on both sides of the
seat pad.
10
Pull the side of the Seat Pad up and slide the
Harness Strap behind the Seat Pad at the shoulder and
the waist, repeat for the other Harness Strap.
12
To reinstall softgoods, follow steps 4-11 in reverse.
IMPORTANT! Make sure all softgoods are properly
installed before use.
CLEANING
INSTRUCTIONS:
Fabrics may be spot-cleaned with mild soap and
water, or machine washed in cold water on delicate
cycle using mild detergent. Hang to dry. DO NOT
BLEACH.
Please consult your product manual for instructions
on additional care and maintenance instructions.
3

Advertisement

loading