036-21300-002-A-0905
FIGURE 2 - UNIT DIMENSIONS KEU090 & 120
ACCESSORIES
•
ELECTRIC HEATER - Add 14-1/4" to unit height when used.
•
SUPPLY AIR PLENUM - Add 27-1/2" to unit height when used.
•
BASE - Add 20" to unit height when used.
TABLE 19: UNIT CLEARANCES KEU090 & 120
MINIMUM CLEARANCES
Side with RETURN AIR opening
Side with SUPPLY AIR opening
Side with PIPING CONNECTIONS
Side opposite with PIPING CONNECTIONS
Side with access for both POWER & CONTROL
3,
WIRING
4
Bottom
Unitary Products Group
090-120
24"
1
24"
2
36"
12"
-
-
All dimensions are in inches. They are
subject to change without notice. Certi-
fied dimensions will be provided upon
request.
1. Overall dimensions of the unit will vary if an electric
heater, a supply air plenum or a base is used.
2. This dimension is required for removal of the coil. Only
26" is required for normal service.
3. Although no clearance is required for service and oper-
ation, some clearance may be required for routing the
power and control wiring.
4. Allow enough clearance to trap the condensate drain
line.
17