York D2CE Technical Manual page 18

5.
HIGH ALTITUDE - PROPANE GAS
required for applications between 2000 and 6000
feet altitude. Must be used with propane conver-
sion kit.
6. - Designed to work with above
BURGLAR BARS
roofcurbs, depending on unit model. Fits duct
openings of curb supply and return air openings.
7.
SIDE DUCT FLANGE
flanges for side duct applications. Do not use on
units with power exhaust.
8.
HIGH SPEED DRIVE
belt for higher CFM and/or static pressure require-
ments.
9. - Allows unit to be handled with 90"
WOOD SKID
forks.
10.
ECONOMIZER/MOTORIZED DAMPER RAIN HOOD
- Contains all hood panels and
(DCE/CG300 only)
the hardware for assembling.
11. - Multiple models available from
THERMOSTATS
A.C.O., M.C.O., Electronic or Electrical Mechanical
versions.
18
- Contains orifices
- Supply and return air duct
- Includes blower pulley and
12.
ANTI-RECYCLE TIMER
between compressor cycles.
13.
LOW AMBIENT KIT
tion down to 0°F.
OTHER FACTORY INSTALLED OPTIONS
1 POWER EXHAUST OPTION - To work in conjunc-
tion with economizers.
2. TECHNICOAT PHENOLIC COATED COND. COIL
3. ELECTRONIC ENTHALPY ECONOMIZER
4. DUAL INPUT ELECTRONIC ENTHALPY ECON-
OMIZER
036-21359-001-B-0302
- Assures 5-minute off-time
- Provides unit cooling opera-
Unitary Products Group