Datalogic HandScanner SR User Manual
Hide thumbs Also See for HandScanner SR:
Table of Contents

Advertisement

HANDSCANNER
USER MANUAL
Standard and Mid Range
HandScanner
©2020 Datalogic S.p.A. and/or its affiliates
• All rights reserved • Without limiting the rights under copyright,
no part of this documentation may be reproduced, stored in or
introduced into a retrieval system, or transmitted in any form or
by any means, or for any purpose, without the express written
permission of Datalogic S.p.A. and/or its affiliates • Datalogic and
the Datalogic logo are registered trademarks of Datalogic S.p.A. in
many countries, including the U.S. and the E.U.
www.datalogic.com
820118400 (Rev. A) September 2020
Datalogic S.r.l.
Via San Vitalino 13
40012 Calderara di Reno (BO)
Italy
Tel. +39 051 3147011
Fax +39 051 3147205
©2020 Datalogic S.p.A. and/or its affiliates
All rights reserved. Without limiting the rights under copyri-
ght, no part of this documentation may be reproduced, sto-
red in or introduced into a retrieval system, or transmitted
in any form or by any means, or for any purpose, without
the express written permission of Datalogic S.p.A. and/or its
affiliates.
Owners of Datalogic products are hereby granted a
non-exclusive, revocable license to reproduce and transmit
this documentation for the purchaser's own internal busi-
ness purposes. Purchaser shall not remove or alter any pro-
prietary notices, including copyright notices, contained in this
documentation and shall ensure that all notices appear on
any reproductions of the documentation.
Electronic versions of this document may be downloaded
from the Datalogic website (www.datalogic.com). If you visit
our website and would like to make comments or sugge-
stions about this or other Datalogic publications, please let
us know via the "Contact" page.
Disclaimer
Datalogic has taken reasonable measures to provide infor-
mation in this manual that is complete and accurate, howe-
ver, Datalogic shall not be liable for technical or editorial
errors or omissions contained herein, nor for incidental or
consequential damages resulting from the use of this mate-
rial. Datalogic reserves the right to change any specification
at any time without prior notice.
Trademarks
Datalogic and the Datalogic logo are registered trademarks
of Datalogic S.p.A. in many countries, including the U.S.A.
and the E.U.
HandScanner and Memor are trademarks of Datalogic S.p.A.
and/or its affiliates. Google, Google Play and other marks are
trademarks of Google LLC.
All other brand and product names may be trademarks of
their respective owners.

Support Through the Website

Datalogic provides several services as well as techni-
cal support through its website.
Log on to www.datalogic.com.
For quick access, from the home page click on the
search icon , and type in the name of the pro-
duct you're looking for. This allows you access to
download Data Sheets, Manuals, Software & Utilities,
and Drawings.
Hover over the Support & Service menu for access to
Services and Technical Support.

Warranty

Datalogic warrants that the Products shall be free from defects in
materials and workmanship under normal and proper use during
the Warranty Period. Products are sold on the basis of specifications
applicable at the time of manufacture and Datalogic has no obliga-
tion to modify or update Products once sold. The Warranty Period
shall be one year from the date of shipment by Datalogic, unless
otherwise agreed in an applicable writing by Datalogic.
Datalogic will not be liable under the warranty if the Product has
been exposed or subjected to any: (1) maintenance, repair, installa-
tion, handling, packaging, transportation, storage, operation or use
that is improper or otherwise not in compliance with Datalogic's
instruction; (2) Product alteration, modification or repair by anyone
other than Datalogic or those specifically authorized by Datalogic;
(3) accident, contamination, foreign object damage, abuse, neglect
or negligence after shipment to Buyer; (4) damage caused by fai-
lure of a Datalogic-supplied product not under warranty or by any
hardware or software not supplied by Datalogic; (5)any device on
which the warranty void seal has been altered, tampered with, or
is missing; (6) any defect or damage caused by natural or man-
made disaster such as but not limited to fire, water damage, floods,
other natural disasters, vandalism or abusive events that would
cause internal and external component damage or destruction of
the whole unit, consumable items; (7) use of counterfeit or repla-
cement parts that are neither manufactured nor approved by Data-
logic for use in Datalogic-manufactured Products; (8) any damage
or malfunctioning caused by non-restoring action as for example
firmware or software upgrades, software or hardware reconfigura-
tions etc.; (9) loss of data; (10) any consumable or equivalent (e.g.
cables, power supply, batteries, etc.); or (11) any device on which
the serial number is missing or not recognizable.
THE DATALOGIC WARRANTIES ARE EXCLUSIVE AND IN LIEU
OF ALL OTHER WARRANTIES, WHETHER WRITTEN, EXPRESS,
IMPLIED, STATUTORY OR OTHERWISE, INCLUDING, BUT NOT LIMI-
TED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR PARTICULAR PURPOSE. DATALOGIC SHALL NOT
BE LIABLE FOR ANY DAMAGES SUSTAINED BY BUYER ARISING
FROM DELAYS IN THE REPLACEMENT OR REPAIR OF PRODUCTS
UNDER THE ABOVE. THE REMEDY SET FORTH IN THE WARRANTY
STATEMENT IS THE BUYER'S SOLE AND EXCLUSIVE REMEDY FOR
WARRANTY CLAIMS. NO EXTENSION OF THIS WARRANTY WILL BE
BINDING UPON DATALOGIC UNLESS SET FORTH IN WRITING AND
SIGNED BY DATALOGIC'S AUTHORIZED REPRESENTATIVE. DATA-
LOGIC'S LIABILITY FOR DAMAGES ON ACCOUNT OF A CLAIMED
DEFECT IN ANY PRODUCT DELIVERED BY DATALOGIC SHALL IN
NO EVENT EXCEED THE PURCHASE PRICE OF THE PRODUCT ON
WHICH THE CLAIM IS BASED. DATALOGIC SHALL NOT BE LIABLE
FOR DAMAGES RELATING TO ANY INSTRUMENT, EQUIPMENT,
OR APPARATUS WITH WHICH THE PRODUCT SOLD UNDER THIS
AGREEMENT IS USED. Further details on warranty coverage, rights
and conditions are addressed under and regulated by the Terms and
Conditions of Sales of Datalogic available at https://www.datalogic.
com/terms_conditions_sales.

Advertisement

Table of Contents
loading

Summary of Contents for Datalogic HandScanner SR

  • Page 1: Support Through The Website

    Products once sold. The Warranty Period ©2020 Datalogic S.p.A. and/or its affiliates shall be one year from the date of shipment by Datalogic, unless All rights reserved. Without limiting the rights under copyri- otherwise agreed in an applicable writing by Datalogic.
  • Page 2: Table Of Contents

    Hand Trigger Properties ......... COMPATIBILITY WITH DATALOGIC MOBILE TERMINALS ..21...
  • Page 3 STORAGE AND CLEANING ........22 Storage ............Cleaning .
  • Page 4: About These Operating Instructions

    ABOUT THESE OPERATING INSTRUCTIONS SAFETY INSTRUCTIONS This user manual contains a system overview, technical data about the Hardware and Wearables, detailed step-by-step instructions for using HandScanner system and information about configuration settings and troubleshooting. Hardware It is intended for process planners, configurators and maintenance technicians who are using HandScanner system for the first time.
  • Page 5: Scope Of Delivery

    Do not use any damaged Hardware or Wearables! Check whether Hardware and Wearables are properly packaged and undamaged. HandScanner Connectivity device Standard range Mid range Datalogic Gateway with USB cable Charging station Wearables Hand Trigger Datalogic Charging Station with power cable (USB-C) and power supply...
  • Page 6: Handscanner

    Connection Battery Interfaces symbol symbol range Bluetooth: HID Profiles LEDs Android: HID, App/SDK Interfaces iOS: HID, iOS SDK USB: Datalogic Gateway, USB HID (keyboard input on host), USB CDC (virtual com port) NOTE Further technical specifications are available at datalogic.com/support.
  • Page 7: Connectivity Device

    Configuration Tool https://www.datalogic.com/handscanner/config Barcode Connection options USB HID (keyboard input on host) LED 1 (UBS LED) LED 2 (Scanner LED) USB CDC (virtual com port) LED 3 (Cloud LED) NOTE Further technical specifications are available at datalogic.com/support. Micro USB socket...
  • Page 8: Charging Station

    Power supply 5 VDC (1.2 A) via power supply PS-MCHS7500 Charging time 2 hours Attachment opening for NOTE M5 screws Further technical specifications are available at datalogic.com/support. Pins Charging tray USB-C Attachment opening for Label with serial number cables ties...
  • Page 9: Wearable

    10 pieces per package Available sizes S, M, L Safety & Certification EN388 (2131) Standards EN420 Hand Trigger RoHS Certification CE mark Textile trigger NOTE Further technical specifications are available at datalogic.com/support. Fastening rail for HandScanner Label with size indication Variable velcro connection...
  • Page 10: Application Of Handscanner System

    Follow the previous step 1 and step 2 for “Connetion with USB Cable in USB HID Mode”. Continue with the following steps: 3. In the configuration tool https://www.datalogic.com/handscanner/con- under “Connectivity Configuration > Integration Path” select USB CDC. Step: Connect the Gateway More detailed information about this can be found in “Configure Devices and...
  • Page 11: Rd Step: Switch On The Handscanner

    You can connect the HandScanner to the Insight Mobile App. Please always download the latest version of Insight Mobile from https://www.datalogic.com/handscanner/config, “Downloads” section. 1. Position HandScanner on the fastening rail of the wearable. The pins face Information on how to use the software can be found at https://www.datalogic.com/handscanner/developer. down. Connect via BLE HID to and end device 2.
  • Page 12 Connect with Apple iOS 11 or higher Connect with Google Android 4.4 or higher DLHS - 00000 Under “Settings - Bluetooth,” activate the Select “DLHS - 00000”. Under “Settings - Connected devices,” switch Tap “Bluetooth” and select “Pair new device”. Bluetooth option.
  • Page 13: Th Step: Scan

    Connect with Microsoft Windows 10 RESULT DLHS - 00000 The HandScanner will flash blue twice and you will Under “Bluetooth & other devices,” click on Select the option “Bluetooth: Mouses, keybo- hear two beeps. The HandScanner will be shown as “Add Bluetooth and other devices”.
  • Page 14: Th Step: Disconnect Handscanner

    This will cause ALL paired devices to disconnect from the Gateway. RESULT The LED of the Gateway no longer lights up green. The connection cable is disconnected from the Gateway. Content: “Datalogic” RESULT HandScanner lights up green. You can hear a beeping sound and feel a short vibration. HandScanner has...
  • Page 15: Th Step: Disconnect Handscanner (Ble Hid)

    Step: Disconnect HandScanner (BLE HID) Disconnect from Google Android NOTE Only disconnect HandScanner if this is to be newly connected to another end device. Disconnect from Apple iOS DLHS - 00000 DLHS - 00000 DLHS - 00000 DLHS - 00000 In the Bluetooth option under “Paired devi- Select “Forget”.
  • Page 16: Th Step: Release Handscanner From Wearable

    Disconnect from Microsoft Windows Step: Release HandScanner from Wearable CAUTION Do not rub over the pins of the wearable with the HandScanner! This may otherwise lead to bended pins. 1. Use your fingers to press between HandScanner and the fastening rail of the wearable.
  • Page 17: Configuration Tool Registration And Login

    CONFIGURATION TOOL REGISTRATION AND LOGIN CONFIGURE DEVICES AND FIRMWARE UPDATES The first time you access the Configuration Tool (https://www.datalogic.com/handscanner/config), you will be reque- The configuration tool under https://www.datalogic.com/handscanner/config can be used to individually set the Hand- sted to register in order to obtain the following credentials: Scanner system and improve scanning processes.
  • Page 18: Nd Step: Create A New Configuration

    Here it is possible to configure the connectivity settings according to the end device selected previously. Create the condition “Barcode Matches: Gloves” and the action “Add Prefix Datalogic.” For example, if you selected “Gateway” you can choose HID or CDC mode. It is also possible to adjust the maximum number of HandScanners that can connect to the Gateway (multipairing - up to 5 devices).
  • Page 19 To configure the Gateway: 5. Eject the Gateway mass storage from your File Explorer (e.g. on Windows, right-click on the Gateway and click on Eject). CAUTION Do not disconnect the Gateway from the computer during the upload! 1. Connect the Gateway with the computer. The Gateway boots up. This takes about 2 min and is finished when the USB LED shows constant green light.
  • Page 20: Signal Tables

    SIGNAL TABLES General HandScanner Gateway Description Connection symbol Battery symbol Audio signal Vibration Description LED 1 (USB - LED) LED 2 (Scanner - LED) LED 3 (Cloud - LED) Barcode data could be Short green Short positive Short vibration Gateway boots up Left to right run through all LEDs alternating Blue / Green until start transferred flashing...
  • Page 21: Compatibility With Datalogic Mobile Terminals

    COMPATIBILITY WITH DATALOGIC MOBILE TERMINALS USB Gateway USB Gateway Model Bluetooth HID Insight Mobile App Insight Mobile SDK HID mode CDC mode Falcon X3+ Not compatible Not applicable Not compatible Skorpio X4 / Falcon X4 (Android) Not applicable Not compatible...
  • Page 22: Storage And Cleaning

    Because not everyone will follow exactly the same steps with the same cloths and cleaning agents that we tested in our the on-screen keyboard is not visible guages and Input > Physical Keyboard > lab, Datalogic disclaims all warranties and does not assume any liability with respect to the recommendations expres- anymore Enable “Show virtual keyboard”...
  • Page 23: Ble - Data Transfer

    For information about the disposal of Waste Electrical and Electronic Equipment (WEEE), please refer Gateway 2. Lights up blue twice briefly while Hand- to the website at www.datalogic.com. Scanner is connecting and after a successful connection HandScanner is out of range of the...
  • Page 24: Directives & Certification

    (2) This device must accept any interference, including interference that may cause undesired operation of the device. Under the regulations of the FCC and the IC the user has to be aware of the following when using the Datalogic Hand- Scanner: Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.
  • Page 25: Appendix - Configuration Barcodes

    APPENDIX - CONFIGURATION BARCODES Pairing Barcode Scanner Factory Reset Gateway Mass Storage ON Gateway Factory Reset Gateway Mass Storage OFF...

This manual is also suitable for:

Handscanner mr

Table of Contents