Section 5: Unpacking Instructions - Yard-Man 247.37979 Operator's Manual

SECTION 5: UNPACKING INSTRUCTIONS

REMOVE UNIT FROM CARTON
(See Figure 3.)
• Remove staples, break glue on top flaps, or cut tape at carton end and peel along top flap to open carton.
• Remove loose parts if included with unit (i.e., operator's manual, etc.).
• Cut along dotted lines and lay carton down flat.
• Remove packing material.
• Roll or slide unit out of carton. Check carton thoroughly for loose parts.
DISCONNECT SPARK PLUG WIRE
Before setting up your lawn mower, disconnect the spark plug wire from the spark plug, and ground it against the
engine by attaching rubber boot to a bolt or metal clip to the grounding post on the engine. See Figure 4.
REMOVE MANUAL & LOOSE PARTS
PUSH
Figure 3
Spark Plug
Wire
Figure 4
Spark Plug
7