Section 7: Controls; Throttle Control; Recoil Starter; Shift Lever - Yard-Man 247.37979 Operator's Manual

SECTION 7: CONTROLS

Blade Control Handle
BLADE CONTROL HANDLE
The blade control handle is located on the upper handle of the mower. See Figure 5. The blade control handle
must be depressed in order to start and operate the unit. Release the blade control handle to stop the engine and
blade.
WARNING:
blade will be rotating whenever the engine is running.

THROTTLE CONTROL

The throttle is located on the engine. It is used to regulate the engine speed.
WARNING:
control with the engine running.

RECOIL STARTER

The recoil starter handle is attached to the lower handle. See Figure 5. Stand behind the unit in the operating
position to start the unit.
DRIVE CLUTCH CONTROL
Squeeze the drive clutch control to engage the drive system. Release the clutch control to disengage the drive
system. Release the clutch control to slow down when negotiating an obstacle, making a turn or stopping.

SHIFT LEVER

The shift lever is located on the drive clutch control housing on the upper handle. See Figure 5. This lever is used
to select the forward speed of the mower. When changing speed selection, release the drive clutch control.
NOTE:
Move the shift lever only when the engine is running. Changing the shift lever setting with the engine off
can cause damage to the mower.
Throttle Control
Recoil Starter
Cutting Height
Adjustment Lever
The blade control handle is a safety device. Never attempt to bypass its operations. The
The throttle control cannot be used to stop the engine. Do not adjust the throttle
Drive
Clutch
Control
Figure 5
10
Shift Lever