Remote control
Operating with Yamaha AV amplifier remote controls
You can also operate this unit by using the remote control supplied with your Yamaha AV amplifier (such as
DSP-AX861SE). See page 28 for details.
1
1
2
4
5
2
7
8
0
ENTER
FUNCTION
3
FM MODE
SELECT
4
TUNING MODE
1 Infrared transmitter
Outputs infrared controls signals. Aim this transmitter at
the component you want to operate.
2 Numeric buttons, ENTER
Selects the desired preset DAB services (see page 15) or
FM/AM stations (see page 23).
3 FUNCTION/FM MODE
• Activates the DAB function setup mode when this unit
is in the DAB tuning mode (see page 13).
• Switches the FM radio wave reception mode (stereo or
monaural) when this unit is in the FM tuning mode (see
page 19).
POWER
5
DAB/FM/AM
6
3
BAND
INFO/TEXT
7
6
AUTO SCAN
8
9
MEMORY
9
CLEAR
0
A
TUNING
4 SELECT/TUNING MODE
Selects the tuning mode (automatic, manual, or preset
tuning) when this unit is in the FM/AM tuning mode.
5 POWER
Turns on this unit. Press this button again to set this unit to
the standby mode (see page 9).
Note
In the standby mode, this unit consumes a small amount of power
in order to receive infrared signals from the remote control.
6 BAND
Selects the reception band (DAB, FM, or AM).
7 INFO/TEXT
Turns on and changes the Radio Data System or DAB
service information in the front panel display.
8 AUTO SCAN
Starts the automatic scanning function when this unit is in
the DAB tuning mode (see page 11).
9 MEMORY
Sets this unit to the preset station memory mode when this
unit is in the DAB tuning mode (see page 15) or FM/AM
tuning mode (see pages 21 and 22).
0 CLEAR
Deletes the preset memory of the currently selected preset
station number (see pages 16 and 22).
/ n
A TUNING
k
• Selects the preset DAB, FM, or AM stations or services
when this unit is in the preset tuning mode.
• Selects the DAB, FM, or AM stations or services when
this unit is not in the preset tuning mode.
Controls and functions
5
En