Display Panel - Yamaha RX-V793 Owner's Manual

DISPLAY PANEL

PRESET
ROOM 2
AM
FM
MEMORY TAPE
AUTO TUNING
ROOM 2 CONTROL
2 3
1
Multi-information display
Displays various information, for example station frequency,
preset station number and name of selected input source.
2
MEMORY indicator
When the MEMORY button is pressed, this indicator flashes
for about 5 seconds. During this period, the displayed station
can be programmed to the memory by using the A/B/C/D/E
button and the preset station number selector buttons.
3
AUTO TUNING indicator
Lights up when this unit is in the automatic tuning mode.
4
TAPE MONITOR indicator
Lights up when the tape deck (or MD recorder etc.) is selected
as the input source by pressing the TAPE/MD MONITOR
button.
5
STEREO indicator
Lights up when an FM stereo broadcast with sufficient signal
strength is received.
kHz
MHz
2 MONITOR STEREO
SPEAKERS SPEAKERS
A B
0 20 40 60
4 5 6
1
DIGITAL
ENHANCED
70 mm
NORMAL WIDE PHANTOM
AUTO
l00
7
6
Signal-level meter
Indicates the signal level of the received station.
If multipath interference is detected, the indication decreases.
7
DIGITAL, DSP and
" DIGITAL" lights up when the built-in Dolby Digital (AC-3)
Decoder is on and the signals of selected source encoded with
the Dolby Digital (AC-3) is not in 2-channels. "DSP" lights up
when the built-in digital sound field processor is on, and "
PRO LOGIC" lights up when the built-in Dolby Pro Logic
Surround Decoder is on. Depending on the selected DSP
program, both "
" PRO LOGIC" will light up.
8
Digital audio input signal indicators
When digital audio signals not encoded with the Dolby Digital
(AC-3) are input to this unit, "PCM DIGITAL" lights up.
When digital audio signals encoded with the Dolby Digital
(AC-3) are input to this unit, "
9
SLEEP indicator
Lights up while the built-in SLEEP timer is functioning.
DIGITAL DSP PRO LOGIC
PCM DIGITAL
8
PRO LOGIC indicators
DIGITAL" and "DSP", or both "DSP" and
DIGITAL" lights up.
dB
m
S
SLEEP
9
21