Yamaha RX-V595 Owner's Manual page 30

TO RECORD A SOURCE TO TAPE OR MD
1
Select the source to be recorded.
Front panel
2
Play the source and then turn VOLUME up to confirm
the input source. (For detailed information on tuning,
see page 31.)
Front panel
3
Begin recording on the tape deck, MD recorder or VCR
connected to this unit.
30
01RX-V595-e/f3
4 1 2
Remote control
or
Remote control
or
30
4
When the tape deck or MD recorder is used for
recording, you can monitor the sounds being recorded
by pressing TAPE/MD MON / EXT. DECODER so that
the "TAPE/MD MON" indicator lights up on the display.
Front panel
Notes
• The settings of DSP and VOLUME, BASS, TREBLE and
BALANCE have no effect on the material being recorded.
• A source that is connected to this unit through digital
terminals only cannot be recorded by a tape deck or VCR
connected to this unit.
• Please check the copyright laws in your country to record
from records, compact discs, radio, etc. Recording of
copyright material may infringe copyright laws.
If you watch a video software that uses scrambled or
encoded signals to prevent it from being dubbed, there may
be a case that the picture itself will be affected by those
signals.
6/23/99, 4:10 PM
1,4
2
Remote control
or