Connecting A Multi-Format Player Or An External Decoder - Yamaha RX-V1700 Owner's Manual

CONNECTIONS

Connecting a multi-format player or an external decoder

This unit is equipped with 6 additional input jacks (left and right FRONT, CENTER, left and right SURROUND and
SUBWOOFER) for discrete multi-channel input from a multi-format player, external decoder, sound processor or
pre-amplifier.
If you set "INPUT CH" to "8ch" in "MULTI CH SET" (see page 89), you can use the input jacks assigned as "FRONT"
in "MULTI CH SET" (see page 89) together with the MULTI CH INPUT jacks to input 8-channel signals.
Connect the output jacks on your multi-format player or external decoder to the MULTI CH INPUT jacks. Be sure to
match the left and right outputs to the left and right input jacks for the front and surround channels.
Notes
• When you select the component connected to the MULTI CH INPUT jacks as the input source (see page 41), this unit automatically
turns off the digital sound field processor, and you cannot select sound field programs.
• This unit does not redirect signals input at the MULTI CH INPUT jacks to accommodate for missing speakers. We recommend that
you connect at least a 5.1-channel speaker system before using this feature.
For 6-channel input
CENTER FRONT(6CH) SURROUND
SUB
WOOFER
MULTI CH INPUT
Multi-format player/
External decoder
26
En
L
R
SB(8CH)
L R
L R
For 8-channel input
( )
( C)
MD/
TAPE
*1
CENTER FRONT(6CH) SURROUND
SUB
WOOFER SB(8CH)
MULTI CH INPUT
L R
Multi-format player/
External decoder
Note
*1 The analog audio input jacks assigned as "FRONT" in
"MULTI CH SET" (see page 89).
L
R
L
R
SUB
L R L R