Adjusting Delay Time And Each Speaker Output Level - Yamaha R-V1103 Owner's Manual

ADJUSTING DELAY TIME AND EACH SPEAKER OUTPUT LEVEL

In using the digital sound field processor including the Dolby Pro
Logic Decoder or the Dolby Digital (AC-3) Decoder, you can
adjust delay time between the main sound and effect sound, and
each speaker output level as you prefer.
Method of adjustment
If you will use the remote control transmitter, set the
TIME/LEVEL·SET MENU switch to the TIME/LEVEL
position on the remote control transmitter.
Note: Be sure to use the remote control transmitter with the
lid open.
1
Press once or more until the name of item on which you
will make an adjustment appears on the display panel.
Front panel
DELAY/CENTER SET
/REAR/SWFR MENU
Whenever pressed, the selection changes as the above chart
shows.
* Pressing the key on the remote control transmitter
changes the selection in the reverse order.
* Depending on a mode of this unit, you cannot select all
items.
38
D E L A Y
C E N T E R
R S U R .
L S U R .
S W F R
TIME/LEVEL
SET MENU
Remote control
or
Note: These adjustments can be made only when the effect
sound is on. If none of the indicators
PRO LOGIC are not illuminated on the display panel, press
the EFFECT switch on the front panel or the EFFECT ON/OFF
key on the remote control transmitter so that at least one of
those indicators lights up on the display panel.
(Delay time)
(Center speaker output level)
(Right rear speaker output level)
(Left rear speaker output level)
(Subwoofer output level)
2
Adjust the level on the selected item.
Front panel
DELAY/CENTER SET
/REAR/SWFR MENU
3
Repeat step 1 and 2 to make adjustments on other items.
DSP DIGITAL
, and
Remote control
or