Yamaha R-V1103 Owner's Manual page 14

CONNECTING TO DIGITAL (OPTICAL AND COAXIAL) TERMINALS
If your DVD (LD) player, TV/satellite tuner, etc. are equipped
with coaxial or optical digital audio signal output terminals, they
can be connected to this unit's COAXIAL and/or OPTICAL
digital signal input terminals.
To make a connection between optical digital audio signal
terminals, remove the cover from each terminal, and then
connect them by using a commercially available optical fiber
cable that conforms to EIAJ standards. Other cables might not
function correctly.
Even if you connect an audio/video unit to the OPTICAL (or
COAXIAL) terminal of this unit, you must keep the unit
connected with the same named analog audio signal terminals
of this unit, because digital signal cannot be recorded by a tape
deck or VCR connected to this unit. You can switch the
selection of input signals between "digital" and "analog" easily.
(See page 29 for details.)
DVD (LD) player
ANALOG
OUT
12
COAXIAL
DIGITAL OUT
OPTICAL
DIGITAL
OUT
GND REMOTE CONTROL
IN OUT
75 UNBAL.
ON SCREEN SELECTOR
S VIDEO VIDEO
FM
ANT
S VIDEO SIGNAL
MONITOR VCR
OUT IN OUT
GND
AM
ANT
PHONO CD
TAPE PB REC OUT
1
Notes
When connecting an audio/video unit to both of the digital
and analog terminals of this unit, make sure to connect to
both terminals of the same name.
Be sure to attach the covers when the OPTICAL terminals
are not being used, in order to protect the terminals from
dust.
All digital audio signal input terminals are applicable to the
sampling frequency of 32 kHz, 44.1 kHz and 48 kHz.
PCM/ DIGITAL IN
(AC – 3 DIGITAL IN)
OPTICAL COAXIAL
DVD/LD DVD/LD TV/DBS
VIDEO SIGNAL
MONITOR DVD/LD TV/DBS VCR
OUT IN
AUDIO SIGNAL
TAPE/MD DVD/LD TV/DBS VCR
IN
3 4
(U.S.A. model)
TV/Satellite tuner
COAXIAL ANALOG
DIGITAL OUT
OUT
OUT
OUT