Input Rename; 7 I/O Assignment - Yamaha HTR-5590 Owner's Manual

6 INPUT RENAME

Use this feature to change the name of the input which
appears on the OSD or the front panel display.
1
Press an input selector button (or use
INPUT) to select the input you want to
change the name of.
2
Press AMP to select the
AMP mode.
3
Press j / i to place the _ (under-bar) under
the space or the character you want to edit.
4
Press u/d to select the character you want
to use and j / i to move to the next one.
• Press d to change the character in the following
order, or press u to go in the reverse order.
A to Z, a space, 0 to 9, a space, a to z, a space, #,
*, +, and so on.
• Follow the foregoing procedure to rename other
inputs.
Note
• You can use up to 8 characters to rename the inputs.
5
Press i repeatedly to exit from INPUT
RENAME.

7 I/O ASSIGNMENT

It is possible to assign jacks according to the component
to be used if this unit's COMPONENT VIDEO input jack
or DIGITAL INPUT/OUTPUT jack settings (component
names for jacks) differ from that component. This makes
it possible to change the jack assignment and effectively
connect more component.
Once you assign, you can select that component with
INPUT (or the input selector buttons on the remote
control).
I 7A CMPNT-V INPUT for
COMPONENT VIDEO INPUT jacks
[A] and [B]
Choices:
AMP
Initial settings: [A] DVD
I 7B OPTICAL OUT for OPTICAL
OUTPUT jacks (1) and (2)
Choices:
Initial settings: (1) MD/TAPE
[A] DVD, V-AUX, VCR 2/DVR, VCR 1,
CBL/SAT, D-TV/LD
[B] CBL/SAT, D-TV/LD, DVD, V-AUX,
VCR 2/DVR, VCR 1
[B] CBL/SAT
(1) MD/TAPE, CD-R, CD, PHONO,
V-AUX, VCR 2/DVR, VCR 1, CBL/
SAT, D-TV/LD, DVD
(2) CD-R, CD, PHONO, V-AUX, VCR 2/
DVR, VCR 1, CBL/SAT, D-TV/LD,
DVD, MD/TAPE
(2) CD-R
SET MENU
61