Declaration Of Incorporation - Bosch Rexroth ErgoSpin Installation Instructions Manual

3608870DD4/2015-09 | ErgoSpin/CC-ErgoSpin
Appendix
Additional information on service, repairs,
and training, as well as the current addresses
of our sales offices, can be found at
http://www.boschrexroth.com
If you are located outside Germany, please
contact your local Rexroth partner.
16.4 Declaration of incorpora-
tion
in the sense of the EC Machinery Direc-
tive
2006/42/EC, Annex II B
Doc. no.: 3 608 870 3DE
Date: 08.2015
Hereby, the manufacturer
Bosch Rexroth AG
Electric Drives and Controls
Postfach 1161
71534 Murrhardt
Fornsbacher Str. 92
71540 Murrhardt
Germany
declares that the partly completed machinery
Designation: Hand-held nutrunner
Function: Tightening and loosening
screws
Model: ESA.../ ESV.../ ESM.../
CC-ESA.../ CC-ESV.../
CC-ESM...
Serial number: 0 608 841...
Trade name: ErgoSpin, CC-ErgoSpin
satisfies the following basic requirements of
the Machinery Directive 2006/42/EC ac-
cording to the chapter number as per annex I
(see also Table 25 on page 103):
Bosch Rexroth AG
General principles no. 1
1.1.1 1.1.2
1.1.6 1.2.1
1.2.4.2 1.2.4.3
1.3.3 1.3.4
1.3.8 1.3.8.1
1.5.1 1.5.2
1.5.5 1.5.8
1.6.1 1.6.3
1.7.1.1 1.7.2
1.7.4.1 1.7.4.2
2.2.1.1
The requirements are complied with provided
that the information in the product docu-
ments (installation instructions, operating in-
structions, documents for project planning
and configuration) are implemented by the
user of the product. Any requirements of
annex I of the Machinery Directive 2006/42/
EC that are not mentioned above are not ap-
plicable and are not relevant for the product.
We moreover declare that the special techni-
cal documents for this partly completed ma-
chinery have been prepared according to
annex VII part B. They will be transmitted
upon the request of the market surveillance
authorities in the form of paper documents /
in electronic form.
101/110
1.1.3 1.1.5
1.2.3 1.2.4.1
1.2.6 1.3.2
1.3.6 1.3.7
1.3.8.2 1.3.9
1.5.3 1.5.4
1.5.9 1.5.15
1.6.4 1.7.1
1.7.3 1.7.4
1.7.4.3 2.2.1