Yamaha pmn Owner's Manual page 56

BASIC PLAYBACK
I Playing the Dolby Digital EX or DTS ES
software
Tap on the RECEIVER control panel to open the DSP
control panel. Then tap
DTS ES decoder to listen to the Dolby Digital EX and DTS ES
software with a rear center speaker.
The display changes AUTO ^ Discrete 6.1 ^ Matrix 6.1 ^ OFF
each time is tapped.
MATRIX/DISCRETE indicator
D–TV/LD DVD
MATRIX
DISCRETE
CABLE MD/TAPE
SAT CD–R
VCR 1 TUNER
VCR 2 CD
DSP
VCR3/DVR PHONO
V–AUX
AUTO: This mode automatically switches Dolby Digital EX/DTS
ES Matrix 6.1/DTS ES Discrete 6.1 depending on the signal in the
input source that this unit can detect. Rear center speaker does not
work for 5.1 channel sources.
Discrete 6.1: This mode can be selected when the source with
DTS ES Discrete format has been detected. (The "DISCRETE"
indicator lights up.)
Matrix 6.1: This mode makes 6-channel playback of the input
source with Matrix or Matrix compatible format through the Matrix
6.1 decoder. (The "MATRIX" indicator lights up.)
OFF: Rear center speaker does not work in this mode.
Cautions
• Some 6.1-channel compatible discs do not have the signal (flag)
which this unit can automatically detect. When playing this kind
of discs with 6.1 channel, select "Matrix 6.1".
• 6.1-channel playback is not possible even if
following cases:
1 when "1C REAR L/R SP" is set to "NONE"
2 when the sound effect is turned off
3 when the source connected to the 6CH INPUT jack is being
played
4 when Dolby Digital KARAOKE source is being played
E-
50
to turn on the Dolby Digital EX or
VOLUME
LFE
L C R
RL RC RR
SP
A
is tapped in the
I Selecting PRO LOGIC, PRO LOGIC
You can enjoy the 2-channel sources decoded into five or six
discrete channels by selecting PRO LOGIC, PRO LOGIC
6 in the program No. 12.
1
1 Select a 2-channel source and start playback on the
source component.
2
2
Select the decoder.
Tap or on the DSP control panel repeatedly to open the
third DSP control panel (page 5/8). Then tap
repeatedly to select the decoder; PRO LOGIC, PRO
LOGIC , and Neo: 6.
The decoder selection switches among PRO LOGIC, PRO
LOGIC and Neo: 6 on the front panel display.
Cautions
• Playback using DOLBY PRO LOGIC
is possible only for 2-channel signals.
• PROGRAM q/w on the front panel can be also used to select
these programs.
or Neo: 6
or Neo:
or
DOLBY PRO LOGIC decoder
DOLBY PRO LOGIC
decoder
DTS Neo: 6 decoder
and DTS Neo: 6 decoders