Yamaha pmn Owner's Manual page 51

I BGV (Back Ground Video) function
The BGV (Back Ground Video) function allows you to combine a
video signal from a video source with a sound signal from an audio
source. (For example, you can listen to classical music while you
are watching a video.)
Using the remote control, select a source from the video group, then
select a source from the audio group. Use the input selector buttons
on the remote control to make your selections.
Note
• The BGV function does not work if you select the sources using
INPUT SELECTOR on the front panel.
I To mute the sound
Press MUTE on the remote control. To resume the audio output,
press MUTE again.
MUTE
Notes
• You can also cancel mute to press any operation buttons such as
VOL +/–.
• While the mute function is on, "MUTE ON" appears on the front
panel display.
• When this unit enters the standby mode, the mute function will be
cancelled.
I When you have finished using this unit
Press STANDBY/ON (STANDBY on the remote control) to set
this unit in the standby mode.
STANDBY
/ON
BASIC PLAYBACK
STANDBY
E-
45