Resetting The System - Yamaha HTR-6060 Owner's Manual

RESETTING THE SYSTEM

Use this feature to reset all the parameters of this unit to the initial factory settings.
Notes
• This procedure completely resets all the parameters of this unit including the "SET MENU" parameters. However, the advanced setup
menu parameters will not be initialized.
• The initial factory settings are activated next time you turn on this unit.
y
To cancel the initialization procedure at any time without making any changes, press A STANDBY/ON on the front panel to set this
unit to the standby mode.
Press A STANDBY/ON on the front panel to
1
set this unit to the standby mode.
Press and hold B TONE CONTROL and
2
then press A STANDBY/ON to turn on this
unit.
This unit turns on, and the advanced setup menu
appears in the front panel display.
While holding
TONE CONTROL
Rotate the C PROGRAM selector to select
3
"PRESET".
Press B TONE CONTROL repeatedly to
4
select "RESET".
y
Select "CANCEL" to cancel the initialization procedure
without making any changes.
Press A STANDBY/ON to confirm your
5
selection and set this unit to the standby
mode.
100
En
Resetting the system
down
STANDBY
/ON