Pin Assignment Of The Di/Dq Interface (X10 Di/Dq) - Siemens SIMATIC RF600 Series System Manual

Readers
5.4 SIMATIC RF680R
Product
Wide-range power supply unit for SIMATIC RF systems
•
•
•
24 V connecting cable reader ↔ wide-range power supply unit
•
•
•
Set of protective caps
Contains 3 protective caps for antenna output, one protec-
tive cap for digital I/O interface and 2 protective caps for
Ethernet/PROFINET (required for IP65 degree of protection
when some connectors are unused)
DVD "Ident Systems Software & Documentation"
5.4.1.3

Pin assignment of the DI/DQ interface (X10 DI/DQ)

View of the DI/DQ interface (reader end)
Table 5- 27
M12 socket (reader end)
Note
Requirement for external power sources
When the DI/DQ interface is supplied with power by an external power source, this source
must meet the requirements for LPS (Limited Power Sources) and NEC Class 2.
146
With EU plug
With UK plug
With US plug
with plug, 5 m
with open ends, 2 m
with open ends, 5 m
Pin assignment of the DI/DQ interface
Pin
1
2
3
4
5
6
7
8
9
10
11
12
Article number
6GT2898-0AC00
6GT2898-0AC10
6GT2898-0AC20
6GT2891-0PH50
6GT2891-4EH20
6GT2891-4EH50
6GT2898-4AA10
6GT2080-2AA20
Pin assignment
GND (output for supply of digital inputs/outputs [not electrical-
ly isolated])
VCC (output for supply of digital inputs/outputs [not electrically
isolated])
DO Common / Output Common
DO 0 / Output 00
DO 1 / Output 01
DO 2 / Output 02
DO 3 / Output 03
DI 0 / Input 00
DI Common / Input Common
DI 1 / Input 01
DI 2 / Input 02
DI 3 / Input 03
System Manual, 11/2018, J31069-D0171-U001-A21-7618
SIMATIC RF600