Yamaha CC-75 Owner's Manual page 21

COMPACT DISC PLAYER OPERATION
To interrupt playback
1 1
Press the play/pause /
* The " " indicator will flash.
2 2
Press the play/pause /
from the same point.
To stop playback
Press the stop button.
To switch the unit off after use
Turn the unit off by pressing the POWER switch. (The
indicators will go off except for the current time display.)
CD
1 2 3 4 5
1 2 3 4 5
6 7 8
6 7 8 9 0
A B C D E
TIME PROG TAPE EDIT +10
REPEAT RANDOM STOP PLAY/PAUSE OPEN/CLOSE
MODE DISC SKIP TUNER
PLAY STOP PLAY
TAPE
DECK
A/B REC/PAUSE
INPUT
EFFECT LEVEL SP/PHONES MODE DSS
+
-
POWER SLEEP DISPLAY VOLUME
- +
button.
button to resume playback
CD
1 2 3 4 5
1 2 3 4 5
6 7 8
6 7 8 9 0
E
+10
Direct operation
Even when an input source other than CD player is selected,
pressing the play/pause
or the RANDOM play button, or pressing the front edge of the
disc table gently will start playback directly. In this case, if
the tape deck is playing back a tape, it will be stopped
automatically.
* These ways of playback can also be used to close the disc
table. If the table is closed in these ways, playback will
begin automatically, however, the display will not show the
total number of tracks and the total playing time of the disc
to be played.
PLAYXCHANGE
During playback, you can open the disc table by pressing the
PLAYXCHANGE button without interrupting disc playback.
However, in this case, pressing the DISC SKIP button or a
disc selector button has no effect.
Precautions
•
If TV or radio interference occurs during CD player
operation, move the unit away from the TV or radio.
•
Subjecting the unit to shock or vibration can cause
mistracking.
•
Playing some compact discs at high volume can cause
mistracking. In this case, listen at lower volume.
•
Do not pull open the disc table forcibly with your hands.
•
Do not push the disc table while it is moving.
•
If the power fails while the table is open, wait until the
power supply returns or gently push the table manually to
close it.
•
The temperature range for playing compact discs is
recommended to be 5°C (41°F) – 35°C (95°F).
Direct-selection play
By using the track number input buttons on the remote
control transmitter, any track you wish to listen to can be
played directly.
Use the track number input buttons to select the desired
track number. Play will begin automatically.
A. For example, to choose selection 5
Press the "5" button.
B. For example, to choose selection 12
(1) Press the "+10" button.
(2) Within 3 seconds, press "2" button.
C. For example, to choose selection 20
(1) Press the "+10" button.
(2) Within 3 seconds, press the "+10" button again.
(3) Within 3 seconds, press the "0" button.
Note
If you select a track number higher than the number of tracks
on the disc, play will begin from the last track on the disc .
E-13
/ button, a disc selector button