Tools And Test Equipment - Simrad ME70 Instruction Manual

Software documents
•
Software Release Note
Customer acceptance test procedures
•
Factory Acceptance Test
•
Harbour Acceptance Test
•
Sea Acceptance Test

Tools and test equipment

Specific tools and test equipment are required for this Simrad ME70 Factory Acceptance
Test. The required tools and equipment must be made available before the test can start.
The required test equipment is listed. For each item, record the instrument's serial number
and - if relevant - its calibration expiry date.
Multimeter (Make and model)
Personal computer (Make and model)
Dummyload (Make and model)
Kongsberg Maritime 321913
You need one dummyload for each Transceiver Unit connector.
307958/H
: 308386
: 307958
: 307959
: 307960
Introduction
Serial number Calibration
expiry date
Serial number Calibration
expiry date
N/A
Serial number Calibration
expiry date
N/A
N/A
N/A
7